28
Version 1.8, Revision L
Working with the Instrument
5
Key/setting dial
Semiautomatic sectioning mode
Automatic sectioning mode
Toggling from
AUTO
to
MAN
The following key functions are
disabled in semiautomatic mode:
•
Setting cutting window edges
•
Selecting the continuous stroke
(
CONT
)
•
Selecting the section thickness for
the automatic feed (
AUTO FEED
)
•
PAUSE
not active.
Toggling from
MAN
to
AUTO
An audible warning signal sounds
when these keys are pressed.
The following functions keys become
enabled again in automatic mode:
• Cutting window edges that have
already been set
•
Section thickness (
AUTO FEED
)
and continuous stroke (
CONT
)
1
The blade feed rate can be adjusted
from 0.01 to 1.5 mm/s:
0.01 - 0.1 in 0.01 mm/s increments,
0.10 - 0.5 in 0.02 mm/s increments,
0.50 - 1.5 in 0.10 mm/s increments.
ditto
1
Adjusting the amplitude from 0 to
3 mm in 0.05 mm increments
ditto
1
Not possible.
Setting the section thickness for
automatic mode – max. 1000 μm.
