38
Version 1.8, Revision L
Working with the Instrument
5
Fig. 16
11
12
13
•
Before the blade holder can be replaced, it must be brought into a 45° inclined position.
To do so, insert the size 3 Allen key sideways into the blade holder through the hole
and rotate it 45° clockwise.
Turning the screw
counterclockwise releases the blade holder, allowing it to be
replaced.
• The installation is carried out in reverse order.
Cleaning the blade holder
To clean the blade holder after removal, spray it with alcohol. It can then be wiped down with a piece of
cellulose and placed on a cellulose towel to dry completely.
