Leica VT1200, Instructions For Use Manual

Page: 23 / 64

23
Leica VT1200 / Leica VT1200 S
Installation
4
Fig. 10
2
3
4
5
6
7
1. Set the power switch (
→
Fig. 10- 3 ) on the right side of the instrument to OFF (O).
2. Make sure the power cable is correctly connected in the power socket ( → Fig. 10- 2 ) on the right
side of the instrument.
3. Connect the control panel to the socket (
→
Fig. 10- 4 ) .
4. Install the ice tray (
→
Fig. 10- 5 ) .
5. Install the buffer tray (
→
Fig. 10- 6 ) .
6. Install any optional accessories, such as the magnifier, microscope, foot switch, etc. according
to ( → p. 53 – 9.1 Extension accessories for standard specimens) .
7. Use the power switch ( → Fig. 10- 3 ) to switch on the instrument.
Note
To make it easier to insert the specimen, adjust the specimen receptacle to its lowest position, and
adjust the blade holder to its rearmost position during the first reference run.