45
7. Startup
Variable Function Keys at the stand
A factory preset is performed which fits your
microscope configuration. The function keys
are labeled accordingly, and a separate
description of the key occupation accompanies
the microscope (“Identification Sheet“).
Abbreviations are listed on p.41f.
Note:
The setting of the variable function keys can
only be altered via the Software Leica
DMControl, module: Configuration.
7.4 The Function Keys at the stand
There is a row of function keys both on the right
and left side of the stand. Some of these keys
are defined, and some of them are variable. The
variable function keys have various meanings
depending on the microscope configuration.
Defined Function Keys on the left side of the
stand
The
TL/IL
key (43.1) switches between incident
light and transmitted light. The last contrast
method used is restored.
The
INT
(43.3) keys adjust the light intensity indi-
vidually. Settings can be made either in large or
small increments. Pushing both
INT
buttons at
the same time switches between coarse and
fine setting. If the fine setting has been
selected, the display indicates „Intensity fine“.
The
AP
(43.2) keys for the aperture diaphragm
and
FD
(43.4) for the field diaphragm are used
to open/close each diaphragm.
Note:
Changes in light intensity and settings of
aperture and field diaphragms are stored for the
current objective and contrasting method.
Fig. 43
Defined Function Keys
1
Transmitted light/incident light
2
Aperture diaphragm
3
Light Intensity
4
Field diaphragm
4
1
3
2
