18
5. Unpacking the Microscope
The device is delivered in several boxes.
The
stand box
contains the following compo-
nents:
• Stand with integrated incident light axis and
objective nosepiece
• Specimen stage with stage bracket
• Power cable and PC connecting cable
• CD with Leica DMControl software package
• Instructions and list of microscope default
settings („Identification Sheet“)
The
system box
contains the microscope acces-
sories:
• Tube
• Eyepieces
• Objectives
• Condenser
• Lamp housings with accessories
• Fitting tool
• Depending on configuration, additional micro-
scope accessories such as filter cubes, etc.
The CTR6000 Electronics Box, the remote
control element SmartMove and the external
ebq 100 supply unit* are delivered in separate
packaging.
First, carefully remove all components from the
transportation and packaging materials.
Note:
If at all possible, avoid touching the lens sur-
faces of the objectives. If fingerprints do appear
on the glass surfaces, remove them with a soft
leather or linen cloth. Even small traces of finger
perspiration can damage the surfaces in a short
time. See the chapter, "Care of the Microscope"
→
p. 81, for additional instructions.
Caution!
Do not yet connect the microscope and pe-
ripherals to the power supply at this point!
5. Unpacking the Microscope
