4
10 Adhere Cable holders
along cryostat top outer wall
11 ECU Rear with Cable &
Power Connectors
12 Connect Mech, Oil Bath Cables to
ECU
& Power cord to the ECU and wall outlet
Turn the ECU on
13 Mech Cable
connected to ECU
14 External-Installation
Complete
Cryo-Vac Shown
15 Internal-Installation Complete
Cryo-Vac Shown
*The standard CryoJane Mech installation is shown in Fig. 07.
The Hacker/Bright OTF and Microm HM 560 cryostats require an S-Plate
Mech and separate mounting plate for installation.
S-Plate Mech for Hacker OTF and Microm HM 560 Cryostats
Mounting Plate locks onto S-Plate Mech.
Slide Nest Entrance
The entire assembly is adhered to the left cryostat wall as shown in Fig. 07.
Note:
The S-Plate Mech must have enough clearance from the front wall of the
cryostat for slides to enter the Slide Nest.
