13
3.
Holding the Slide at the frosted end,
rapidly peel off the protective mylar
film which covers the adhesive and
discard it.
Figure 7
. Peeling mylar from adhesive coated
slide.
4.
Place the Coated Slide, adhesive-side-
up, on the Blue Pad of the Mech by
slipping the frosted end of the slide
under the stainless steel Spring Clip.
Figure 8
. Adhesive Coated Slide on Blue Pad.
5.
Inside
the cryostat, pick up a pink Tape
and peel away the protective film
covering the adhesive window. Discard
the protective film.
Figure 9
. Exposing the Tape window.
