Leica CM3050 S, Service Manual

Page: 160 / 287

Chapter 3
Service Manual / Leica CM3050 S Page 68 Version 1.0 12/00
© Leica Microsystems
3.17 Service routine
Access
Press key ”KEY”, ”ARROW UP” and ”LIGHT”
(does not work in standby mode)
The following menus can be chosen by pressing the ”ARROW” keys.
1. POT = XXX XXX = tandempot is displayed
BRAKE = ZZ ZZ = set brake value
2. WDOG ON/OFF
3. Specimen fast FWD ON/OFF
4. Specimen fast BWD ON/OFF
5. Specimen slow FWD ON/OFF
6. Specimen slow BWD ON/OFF
7. Cutmotor (additional RUN ENABLE-key necessary) ON/OFF
8. set default clock-default adjustment ON/OFF
9. Valve (Cabin) (defrost valve) ON/OFF
10. Magn.Valve Odj. (object cooling) ON/OFF
11. Reg.Valve Obj. ON/OFF
12. Runtime…(in hours) delete with ON ON/OFF
reactive with OFF, resp.by scrolling
13. Heating (Object) ON/OFF
14. Heating (window, pane) ON/OFF
15. Heating (Cabin) ON/OFF
16. Compressor (chamber cooling) ON/OFF
17. Compressor (object cooling) ON/OFF
18. Light ON/OFF
19. Display Light ON/OFF
20. Button LEDs ON/OFF
21. Trim LEDs ON/OFF
22. Clutch ON/OFF
23. Object Position XX 0 – 255 Typical value: 215 + 3
24. Cab.Temp.
25. Temp.
26. ADC Cab. Ref.
27. ADC Obj. Ref