34
Instructions for Use V 2.4 RevL - 12/2015
4.
Instrument Setup
Unpacking the instrument
(
continued
)
Installing the monitor
• The monitor (
5
) is wrapped in a plastic dust cover (
109
) and
is placed with the screen facing downwards in a molded foam
cushion (
98
) next to the retort (
Fig. 12
).
107
107
Fig. 12
109
Fig. 14
98
102
5
108
• First, take out the two foam parts (
107
) next to the bracket
(
Fig. 12
). Then you remove the dust cover.
• Before the monitor is screwed onto the bracket, you should
check that the three terminals (
102
) (power supply, USB
port and monitor cable) on the bottom of the monitor are
fastened correctly (
Fig. 14
).
• A small plastic bag is fastened to the rear side of the bracket
(
101
), which contains four screws with compatible washers
(
100
) (
Fig. 13
). A compatible No. 3 Allen key (
104
, Fig. 16
)
is also included in the delivery package.
100
101
Fig. 13
98
5