32
Instructions for Use V 2.4 RevL - 12/2015
4.
Instrument Setup
Setting up the ramp
Unpacking the instrument
(
continued
)
Fig. 8
93
92
94
91
91
• Pull out the two rails (
91
)
for the ramp beneath the
instrument by pulling
them forwards (
Fig. 8
).
91
• Hook these rails on the left
and right with the panel
(
92
) into the groove (
93
)
of the pallet so that they
are flush with the wooden
board (
94
) that holds the
instrument (
Fig. 9
).
95
95
Fig. 10
Fig. 9
• While doing so, make sure that the plate (
92
) is between the
two screws (
95
) in the groove. These screws prevent the rail
from being able to shift laterally.
97
96
• To do so, the lever must be folded upwards.
• Now release the brake lever
(
97
) on the two front transport
castors (
96
) so that the instru-
ment can be moved (
Fig. 10
).