8. CONFIGURATION
66
8.6
Configuring the Recall Feature
The recall feature recalls up to 100 panel settings that have been stored according to the
procedures given in section 8.7.1, “Saving the Panel Settings.” You can specify a recall range
by setting a BEGIN address and an END address.
Use the RECALL key on the front panel to recall settings. Use the RECALL settings accessible
from the menu screen to specify the recall range.
●
Procedure
Figure 8-21 Recall settings
8.6.1
Specifying the Recall Range
You can specify a range of consecutive addresses to recall the settings in the RECALL
SETTING configuration screen. Use the jog dial and
and
keys to set the direction.
The settings that you make here are not stored to preset memories.
●
Settings
BEGIN 0 to 99
Specifies the start address of the recall range. The panel settings
at the address number specified here are recalled when you
press RECALL or when you press (BEGIN) in the recall
screen. This value must be less than or equal to END.
END
0 to 99
Specifies the end address of the recall range. This value must be
greater than or equal to BEGIN.