manualshive.com logo in svg

Leader LT 450, Instruction Manual, Page: 30 / 158

Share
Download
Leader LT 450 Instruction Manual Download Page 30

3. PANEL DESCRIPTION 

20

 

39  DVI-I output connector on an option 

A component signal output connector. Transmits a signal when the output format is 
component. The specifications are the same as those of the DVI-I connector on the LT 
450. 

See section 7.4, “DVI-I Output Connector” and section 8.10, “Configuring the DVI-I on an Option.” 

 

40  HDMI output connector on an option 

A component signal output connector. Transmits a signal when the output format is 
component. The specifications are the same as those of the HDMI connector on the LT 
450. 

See section 7.5, “HDMI Output Connector and Audio Signal Input Connector” and section 8.11, 
“Configuring the HDMI on an Option.” 

 

41  SCART connector on an option 

A composite signal output connector. Transmits signals when the output format is 
NTSC-M, NTSC-J, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60 or SECAM. 

See section 7.8, “SCART Connector (option)” and section 8.12, “Configuring the SCART Connection on an 
Option.” 

 

42 Power 

input 

connector 

43 Fuse 

AC power supply fuse. Use a fuse with the correct rating. When replacing a fuse, be sure 
to turn off the power switch and to unplug the power cord from the outlet. 

 

44  Serial number plate 

The serial number is engraved on this plate. Tell the LEADER agent this number when 
making an inquiry. 

 

45 Ground 

terminal 

A ground terminal that is connected to the LT 450 case. Be sure to ground the LT 450 for 
safe operation. 

 

Summary of Contents for LT 450































































































































































Reviews:

No comments