7. I/O CONNECTORS
35
7. I/O
CONNECTORS
7.1
Component Output Connectors
BNC connectors for transmitting analog component signals. The top and button rows transmit
the same signals when the output format is component (see Table 12-3, “List of output
connectors”).
The following figure shows the output connectors.
Figure 7-1 Component output connectors
Connect a 75-
Ω
coaxial cable to each component output connector, and terminate the other
end of each cable with 75-
Ω
termination.
7.2
D Connector
D connector for transmitting analog component signals. The D connector transmits signals
when the output format is component (see Table 12-3, “List of output connectors”).
The output connector diagram and pin arrangement are given below.
Figure 7-2 D connector
Table 7-1 D connector pin arrangement
Pin Function Pin
Function
1 G/Y
8 Line
1
2 G/Y_GND
9 Line
2
3 B/P
B
10
Auxilary line 2*
1
4 B/P
B
_GND 11
Line
3
5 R/P
R
12
Hot plug detection GND
6 R/P
R
_GND 13
Auxiliary
line
3*
1
7
Auxilary line 1*
1
14
Hot plug detection*
2
*1 Not connected inside the LT 450. Do not connect anything to this pin if the D connector cable is not
connected.
*2 Not connected inside the LT 450. Hot plug detection is not performed. The signal is transmitted regardless
of whether or not a cable is connected.