2. SPECIFICATIONS
4
●
Remote Control via RS232C
The LT 450 can be remotely controlled from a PC.
●
Preset/Recall
Features
Up to 100 panel settings of output formats and test patterns can be stored and recalled.
●
D Output Connector
Equipped with a JEITA CP-4120 D5 output. ID signals (lines 1, 2, and 3) are supported.
●
RGB
Output
Connector
Equipped with a mini D-sub 15-pin connector—an analog interface for PC monitors.
●
DVI-I
Output
Equipped with a DVI-I connector—a digital interface for PC monitors. Can be used to
check HDCP-compliant copyright protection functions and to make simple checks on the
DDC function.
You can use an adapter or a similar device to connect the output to an HDMI display.
However, audio output and CEC features are not supported.
●
HDMI
Output
Equipped with an HDMI connector—a digital interface used in household televisions and
set-top boxes. It can be used to check HDCP-compliant copyright protection functions and
to make simple checks on CEC and DDC functions.
●
On-screen Display of HDCP and CEC Check Results
The pass/fail results of checking the HDCP copyright protection functions and CEC
functions on the DVI-I and HDMI outputs can be displayed on screen.
●
Output Unit Options
You can add output units according to your objectives.
・
LT 45SER01 (DVI-I unit)
・
LT 45SER02 (HDMI unit)
・
LT 45SER03 (SCART unit)
●
TIMING AND PICTURE TOOL Option (LT 45SER04)
You can transmit timing and picture data that was made on an external PC to the LT 450.
You can then generate these timings and pictures from the LT 450.