Leader LT 450 Instruction Manual Download Page 27 | Manualshive

Page: 27 / 158

Leader LT 450 Instruction Manual Download Page 27

3. PANEL DESCRIPTION

17

17 HDCP

key

Pressing the HDCP key will cause its LED to illuminate and turn HDCP, CEC, and DDC on.
This operation applies to both the HDMI and DVI-I connectors, including those on options.

See section 8.8.1, “Turning HDCP, CEC, and DDC On and Off,” and section 8.9.1, “Turning HDCP and DDC
On and Off,” section 8.10.1, “Turning HDCP and DDC On and Off,” and section 8.11.1, “Turning HDCP,
CEC, and DDC On and Off.”

18 Arrow keys

Used to select items. Also used to recall panel settings when combined with the DEC, INC,
BEGIN, and RECALL keys.

19 MENU

key

Pressing the MENU key will cause its LED to illuminate and the menu screen to appear.
You use the menu screen to configure the settings. You can exit the menu screen
regardless of the menu level you are at by pressing the MENU key.

See section 8.1, “Menu Screen.”

20 ENTER

key

Selects a setting or menu.

21 Jog

dial

Selects the output format, sets a numeric value, etc.

«
...
25
26
27
28
29
...
»

Summary of Contents for LT 450































































































































































Reviews:

No comments