manualshive.com logo in svg

Leader LT 450, Instruction Manual, Page: 64 / 158

Share
Download
Leader LT 450 Instruction Manual Download Page 64

8. CONFIGURATION 

54

 

8.3.3 

ID Character Size and Number of Characters 

You can set the ID character size and the number of characters in the ID FONT SET 
configuration screen. Use the jog dial and 

  and 

  keys to set them. 

 

●

 Settings 

ID FONT 

16×32 / 32×64 / 64×128 
Sets the character size in dots. 

ID CHAR 

1 to 12 to 20 
Sets the number of characters that will be displayed. The 
characters that are displayed are those specified according to 
the procedures given in section 8.3.5, “Entering ID Characters.” 
The background is black for the specified number of characters. 
If HDMI_INFO is selected according to the procedures given in 
section 8.3.2, “Displayed ID Character Contents,” this setting will 
not take effect. 

 

●

 Procedure 

 MENU  

→

 ID CHARACTER 

→

 ID FONT 

 

 

Figure 8-9    ID character size and number of characters 

Summary of Contents for LT 450































































































































































Reviews:

No comments