8. CONFIGURATION
47
8.2.1
Turning the Cursor On and Off
Pressing the CURSOR key will cause its LED to illuminate and a cursor to appear on the
screen. When the cursor appears, the LCD panel displays “CURSOR POSITION,” and you
can set the cursor position.
If you press CURSOR again, the cursor will disappear, and the LED will turn off.
*
When you turn the cursor on, the output signal’s overshoot or undershoot may increase, depending on
the cursor level and line width settings.
●
Settings
CURSOR
ON / OFF*
1
*1 Hereafter, the factory default setting will be indicated by an underline.
●
Procedure
Figure 8-3 Cursor on/off
8.2.2 Cursor
Position
Press CURSOR to set the cursor position. The LCD panel will display “CURSOR
POSITION.” Use the jog dial and
and
keys to set the position.
The selectable cursor position range varies depending on the output format. For details, see
Table 8-1, “Selectable ranges for cursor and ID character positions.” The factory default
cursor position is X = 959, Y = 539. (If you switch to an output format that has a selectable
range that doesn’t contain X = 959, Y = 539, the cursor position will be adjusted
automatically.)