manualshive.com logo in svg

Leader LT 450, Instruction Manual, Page: 50 / 158

Share
Download
Leader LT 450 Instruction Manual Download Page 50

7. I/O CONNECTORS 

40

 

You can specify and view HDMI output connector settings on the menu screen. For details, see 
section 8.8, “Configuring the HDMI” and section 8.11, “Configuring the HDMI on an Option.” 

 

The HDMI output connector can transmit audio signals (internal or external) along with video 
signals. To receive an external audio signal, set AUDIO INPUT to EXT as described in section 
8.8.2, “Configuring the HDMI Output,” and then apply the audio signal to the audio signal input 
connector. 

 

When using the HDMI output connector, connect a certified cable that has an HDMI logo on it. 

 

7.6 

Composite Output Connector 

The composite output connector is a BNC connector used to transmit composite signals. The 
connector transmits signals when the output format is composite (see Table 12-3, “List of 
output connectors”). 
The following figure shows the output connector. 

 

 

Figure 7-6    Composite Output Connector 

 

Connect a 75-

Ω

 coaxial cable to the composite output connector, and terminate the other end 

of the cable with 75-

Ω

 termination. 

Summary of Contents for LT 450































































































































































Reviews:

No comments