6. OUTPUT PATTERNS
25
6. OUTPUT
PATTERNS
6.1
Selecting the Output Pattern
To select the output pattern, press any of the pattern selection keys shown below. The selected
key LED illuminates, and the signal is transmitted.
Some pattern selection keys have multiple patterns assigned to each key. For such keys, you
can press the key repeatedly to switch the pattern.
For the relationship between the output pattern type and output format, see Table 12-2, “List of
output patterns.”
Figure 6-1 Pattern selection keys
The patterns that can be transmitted vary depending on the output format and aspect ratio. If
you select a pattern that cannot be transmitted (for example, multiburst when component
output for PC monitors is selected), the LCD panel displays “Not available” and black is
transmitted.
Figure 6-2 Not available
6.2
Setting the Saturation
When the output pattern is full field color bar or raster, you can press SATURATION to set the
saturation to 75% or 100%. You can carry out this procedure when the SATURATION indicator
is illuminated. If it is not illuminated, pressing the key produces no effect.
See section 6.5.1, “Color Bar” and section 6.5.2, “Raster.”
Figure 6-3 SATURATION key