Leader Electronics Corp. LT 443D, Instruction Manual, Page: 216 / 239

CS-18
4.9.1 Selecting SELECT PICTURE File
(1) Select [SELECT PICTURE 1] from the [2. NATURAL PICTURE] menu by pressing the
Up or Down key, then press the [ENTER] key.
The NATURAL PICTURE file
＊
list (stored on the CF card in the MEMORY CARD slot)
corresponding to the current format size is displayed as shown below:
＊ NTSC format: “E:\IMAGE\NTSC” folder (E:\ denotes CF card drive)
PAL format: “E:\IMAGE\PAL” folder
3. SELECT PICTURE 1
▼＊ FLOWER 1 1/10
Hierarchy level 3
Amount of NATURAL PICTURE files and file numbers corresponding to the current
format size are displayed.
File name is displayed in uppercase letters.
Up to 100 files can be stored in the same format.
(2) Selecting PICTURE 1 (NATURAL PICTURE File)
In case of the number of files are ten, position the [
＊
] to the file number ([1/10] to [10/
10]) by pressing the Up or Down key.
When the [ENTER] key is pressed at the file name without asterisk, the file is selected
to [PICTURE 1].
When the [ENTER] key is pressed at the file marked with an asterisk, the file selected
to [PICTURE 1] is canceled.
(3) Selecting PICTURE 2 to PICTURE 5
Apply the same procedure as Step (2), “Selecting PICTURE 1 (NATURAL PICTURE
File)” to display the desired PICTURE (up to five PICTUREs).
Natural Picture file should be selected from PICTURE 1 first.
FLOWER 2 2/10
FLOWER 3 3/10
GREEN 4/10
•
•
YOKOHAMA 7/10
JAPAN 8/10
PHOTO 1 9/10
PHOTO 2 10/10
▼
FLOWER 1 1/10 ＊