Leader Electronics Corp. LT 443D, Instruction Manual

Page: 136 / 239

SD/SDB-10
(3) Setting [EMPHASIS]
This mode is used to set the emphasis bit of the selected group. The settable items
are 50/15, CCITT, and OFF (NO EMPHASIS).
5. EMPHASIS
□ 50/15 □ CCITT ■ OFF
Hierarchy level 5
Position the [ ■ ] to the desired item by pressing the Left or Right key, then press
the [ENTER] key. The menu returns to hierarchy level 4 [4. GROUP 3 SET].
Pressing the [MENU] key selects the next higher hierarchy.
▼ GROUP 3 CH 9
GROUP 3 CH 10
GROUP 3 CH 11
▲ GROUP 3 CH 12
Before setting the embedded audio signal frequency, level, and click for each
channel, select the desired channel by pressing the Up or Down key, then press the
[ENTER] key.
6. GROUP 3 CH 9
▼
FREQUENCY
Hierarchy level 6
▼
FREQUENCY
LEVEL
▲ CLICK
(5) Setting [CH SELECT]
Each group consists of four channels.
The relationship between the group and channel numbers is as follows:
[GROUP 1]: CH 1 to CH 4
[GROUP 2]: CH 5 to CH 8
[GROUP 3]: CH 9 to CH 12
[GROUP 4]: CH 13 to CH 16
(4) Setting [FRAME NO. ON/OFF]
This mode is used to set the frame number of embedded audio signal on or off.
5. FRAME NO. ON/OFF
■ ON □ OFF
Hierarchy level 5
Position the [ ■ ] to the desired item by pressing the Left or Right key, then press
the [ENTER] key. The menu returns to hierarchy level 4 [4. GROUP 3 SET].
Pressing the [MENU] key selects the next higher hierarchy.
5. CH SELECT
▼ GROUP 3 CH 9
Hierarchy level 5
In case of GROUP 3 is
selected.