Leader Electronics Corp. LT 443D, Instruction Manual, Page: 215 / 239

CS-17
4.9 NATURAL PICTURE (w/OP70)
The NATURAL PICTURE display function is used to display data (i.e., bit map data of
NATURAL PICTURE converted into the original data dedicated for the LT 443D)
transferred from the CF card to a high-speed RAM in this unit.
Data should be transferred to a high-speed RAM again when power is turned off since a
high-speed RAM is used.
This menu is only displayed when the NATURAL PICTURE option (OP 70) is installed in
the mainframe.
Use Windows application software of the LT 443D-70 to store NATURAL PICTURE data
on the CF card. Refer to LT 443D-70 instruction manual for detail. (This procedure can be
applied when NATURAL PICTURE data is stored on the CF card.)
Select [NATURAL PICTURE] from the [1. CS SETTING] menu, then press the [ENTER]
key.
(1) CF Card with NATURAL PICTURE
Hierarchy level 2
2. NATURAL PICTURE
▼
SELECT PICTURE 1
▼
SELECT PICTURE 1
SELECT PICTURE 2
SELECT PICTURE 3
SELECT PICTURE 4
SELECT PICTURE 5
FILE TRANSFER
▲
SET TO CF CARD
(2) No CF Card inserted or CF Card without NATURAL PICTURE
Hierarchy level 2 2. NATURAL PICTURE
NO DATA!
Warning message is displayed; no NATURAL PICTURE file cannot be selected.
To read the NATURAL PICTURE file list when the card is inserted after the NATURAL
PICTURE mode is enabled, return to the top menu of [NATURAL PICTURE], then
apply the procedure above again.