Leader Electronics Corp. LT 443D Instruction Manual Download Page 211

Page: 211 / 239

CS-13

(2) ID BLINK TIME

This mode is used to set the blinking on and off times (i.e., duration) of the characters.

Hierarchy level 4

4. ID BLINK TIME

■

ON: 10 s

□

OFF: 10 s

Position the [

■

] to [ON] or [OFF] by pressing the Left or Right key. The “ON” time can

be set from one to 10 seconds by pressing the Up or Down key.

Position the [

■

] to [OFF] by pressing the Left or Right key. The “OFF” time can be set

from one to 10 seconds by pressing the Up or Down key.

Press the [ENTER] key. The menu returns to hierarchy level 3 [3. ID BLINK].

(3) ID BLINK ON/OFF

This menu is used to set the ID BLINK mode on or off.

Hierarchy level 4

4. ID BLINK ON/OFF

■

□

OFF

Position the [

■

] to [ON] or [OFF] by pressing the Left or Right key, then press the

[ENTER] key. The menu returns to hierarchy level 3 [3. ID BLINK].

4.6.6 ID ON/OFF

This mode is used to set ID character display on or off.

(1) Select [ID ON/OFF] by pressing the Up or Down key, then press the [ENTER] key.

Hierarchy level 3

3. ID ON/OFF

■

□

OFF

(2) Position the [

■

] to [ON] or [OFF] by pressing the Left or Right key, then press the

[ENTER] key. The menu returns to hierarchy level 2 [2. ID CHARACTER].

Summary of Contents for LT 443D
















































































































































































































































Search results

Summary of Contents for LT 443D

Reviews:

Leader Electronics Corp. LT 443D, Instruction Manual, Page: 211 / 239

Search results

Summary of Contents for LT 443D

Reviews: