Lavorwash SW 2600 BT, Instructions And Operating Manual

Page: 38 / 92

Pag. 38
FAULTS CAUSES REMEDIES
THE MACHINE CAUSES DUST LEVER IN POSITION TO STOP
SUCTION PUSH THE KNOB TO OPEN THE
SUCTION
FILTERS CLOGGED CLEAN THEM BY SHAKING IT WITH
THE FILTER-SHAKER AND IF
NECESSARY REMOVE AND CLEAN
IT THOROUGHTLY
FILTER DAMAGED REPLACE IT
FILTER BADLY INSTELLED MAKE SURE IS CORRECTLY
INSERTED
SIDE DUST FLAP(S) DAMAGED REPLACE IT (THEM)
CONTINUOUS USE OF THE SIDE
BROOM USE THE SIDE BROOM ONLY FOR
THE EDGES, BORDERS AND
CORNERS
THE MACHINE LEAVES TRACES OF
DIRT ON THE FLOOR THE MAIN BROOM IS NOT
CORRECTLY ADJUSTED OR IS
WORN CHECK THE MAIN BROOM AND IT
"TRACK"
YOU HAVE COLLECTED WIRES,
CABLES ETC. REMOVE THEM
SIDE FLAP(S) DAMAGED REPLACE IT (THEM)
THE COLLECTION BIN IS FULL EMPTY IT
THE EXPLOSION ENGINE IS NOT
PERFORMING CORRECLTY ENGINE AIR FILTER IS DIRTY CLEAN OR REPLACE IT
CARBURATION WRONG RECARBURATE
THE BATTERY-POWERED SWEEPER
IS NOT PERFORMING CORRECTLY;
IT IS SLOW AND IS NOT
CLEANING WELL FLAT BATTERY OR NOT FULLY
CHARGED CHECK THE LEVER OF THE
ELECTROLYTE AND CARRY OUT A
NEW COMPLETE BATTERY
CHARGING CYCLE
THE RECOMMENDED BATTERY
CHARGER HAS NOT BEEN USED USE AN APPROPRIATE BATTERY
CHARGER
CHAPTER 19 - WARRANTY
This machine is guaranteed against defects in workmanship or installation for 12months from the date of sale.
The warranty covers exclusively the replacement or repair parts that are defective. Any other request will not be accepted.
This does not include damage caused by normal wear, use different from that reported on this manual, damage caused
by wrong settings, technical operations not carried out properly, acts of vandalism.