Lauda Viscotemp 15 G, Operation Manual

Page: 42 / 132

42 / 134
ECO Gold 09/2021
7 Operation
Always follow this safety information:
Warning!
Control head drops into bath
Electric shock hazard

Make sure that the control head mounting is securely joined
to the bath.
Warning!
Addition of liquids with low boiling points (e.g. water to hot oil), alter-
ation of liquid properties
(reducing the flash point)
Explosion, burns, scalds, fire

Site the device in suitable premises.
 Avoid dripping water and condensation.

Do not position any small parts and liquids above the device.
 Keep the cover on the thermostat (if present) closed.

Prevent the ingress of secondary liquids (e.g. from custom-
er's heat exchanger).
 Do not work with liquids in the direct vicinity of the device.

Check the heat transfer liquid at least every six months (e.g.
mixing ratio with a hydrometer).
Caution!
Skin contact with heat transfer liquid or hot / cold surfaces
Burns, scalds, frost bite, impacts, cuts,
snagging

Only operate the device with its housing.

Avoid splashes and hand contact with hot or cold heat trans-
fer liquid.

Use CE gloves, protective clothing and eye protection.

Affix the symbol "Hot surface".
 Do not touch the connecting and drainage points in the op-
erating state.