Lauda Viscotemp 15 G, Operation Manual

Page: 102 / 132

102 / 134
ECO Gold 09/2021
17.2 Creating and editing a program
In the following functions are explained below:

Creating and editing a program.
 Insert or append a new segment.

Delete a segment.
Note:

New segments and be inserted and existing ones changed, also the currently active segment, even when a pro-
gram is currently being executed. Furthermore, except for the currently active segment, all segments can be de-
leted at any time.

Changes to the currently running segment are possible. The segment is continued as though the change has been
valid since the start of the segment.

If the new segment time is shorter than the already expired segment time,
then the program skips to the next segment.

If a segment time is required > 999h: 59min, then this time must be spread over several consecutive segments.
Creating and editing a program: Compare the programming example (

17.1)
-
Access to the menu level is obtained by pressing .
-
The adjacent menu window appears by selecting and confirming

Programmer .
-
By selecting and confirming Program 1

Edit you obtain access to
the editor view of the programmer. To view the complete window in-
formation go to the right with .
-
With the keys , , and you obtain access to the individual
segments.
-
The appropriate parameter is selected with and can be changed
with and .
-
Single figures can be selected by pressing or .
-
Confirm your choice with the enter key .
-
You can now select the next segment to be changed using the control
keys.

