Simplifying the Operation
132
7
Using a Program
Note
❒
Using the program causes the pre-
vious settings to be cleared.
❒
If you have no programmed desti-
nations or scan settings as programs,
select the program number, and
then enter the fax number of the
destination and select the scan set-
tings you require.
A
Make sure that the machine is in
facsimile mode and the standby
display is shown.
Note
❒
If the standby display is not shown,
press the
{
Facsimile
}
key.
B
Place the original.
C
Press the
{
Program
}
key.
D
Confirm that
[
Recall
]
is selected,
and press the registered program
number.
The standby display appears.
Then, the programmed fax number
is shown. Transmission Mode is
selected.
E
Press the
{
Start
}
key.
The fax number and specified time
are shown on the display, and the
machine starts to scan the original.
Transmission starts at the specified
time.
ZLFS310N
RussianC4-EN_Combine-F_FM.book Page 132 Tuesday, April 5, 2005 8:22 PM
Summary of Contents for LD225
Page 138: ...Fax via Computer 128 6 RussianC4 EN_Combine F_FM book Page 128 Tuesday April 5 2005 8 22 PM...
Page 164: ...Facsimile Features 154 8 RussianC4 EN_Combine F_FM book Page 154 Tuesday April 5 2005 8 22 PM...
Page 233: ...223 MEMO RussianC4 EN_Combine F_FM book Page 223 Tuesday April 5 2005 8 22 PM...
Page 234: ...224 EN USA B766 8511 MEMO RussianC4 EN_Combine F_FM book Page 224 Tuesday April 5 2005 8 22 PM...