Lanier LD225, Fax Manual

Page: 114 / 236

Reception Features
104
5
Setting priority trays
With the same size of paper loaded
into multiple trays, you can make the
machine use one tray for one function
and another tray for another function.
For example, you may load white A4
paper into tray 1 to use when making
copies, and yellow A4 paper into tray
2 to use when printing received faxes.
You can then easily identify for which
purpose paper has been output. You
can perform this setting using System
Settings. See “Tray Paper Settings”,
General Settings Guide .
Note
❒
When a different size of document
from the priority tray is received,
the tray containing the same size of
paper as the received document is
used.
Just size printing
If you enable this function, received
documents are printed on the sheet
that has the highest priority. This
function is enabled with User Param-
eters. See p.167 “User Parameters”
(switch 05, bit 5).
If the paper tray is not stocked with
paper of a suitable size to print a re-
ceived document, a message appears
on the display prompting you to load
paper of the required size. When you
have loaded new paper, press
[ Exit ] to
print the document.
Note
❒
After pressing
[ Exit ]
, procedure varies
depending on machine status when
the message occurred.
• If any received documents or re-
ports were being printed automat-
ically, the printer automatically
continues printing from where
it left off.
• If any documents or reports were
being printed manually, the
printer does not resume print-
ing. Perform the operation from
the beginning again.
RussianC4-EN_Combine-F_FM.book Page 104 Tuesday, April 5, 2005 8:22 PM