Lanier LD225, Fax Manual

Page: 181 / 236

Using Administrator Settings
171
9
Changing the User Parameters
Preparation
Access to some User Parameter
Settings requires installation of op-
tional equipment, or that other set-
tings be made beforehand.
Important
❒
It is recommended that you print
and keep a User Parameter list when
you program or change a User Pa-
rameter. See p.172 “Printing the
User Parameter List”.
❒
Do not change any bit switches other
than those shown on the previous
pages.
A
Press the
{
User Tools/Counter
}
key.
B
Press [ Facsimile Features ] .
C
Press [ Administrator Tools ] .
D
Press [ Parameter Setting ] .
E
Select the switch number you want
to change.
F
Select the bit number you want to
change.
When the bit number is pressed,
the current value switches between
1 and 0.
Note
❒
Repeat from step
F
to change
another bit number for the same
switch.
G
Press [ OK ] .
Note
❒
To cancel these settings, press [ Can-
cel ] . The display returns to that
of step
E
.
H
Repeat steps
E
through
G
to change
the switch settings.
I
After all the settings are finished,
press
[ Exit ] .
J
Press the
{
User Tools/Counter
}
key.
The standby display appears.
RussianC4-EN_Combine-F_FM.book Page 171 Tuesday, April 5, 2005 8:22 PM