Lanier LD225, Fax Manual

Page: 190 / 236

Administrator Setting
180
9
D
Make sure that [ Vertical ] is select-
ed.
E
Enter the vertical size of the pa-
per using the number keys, and
then press
[
#
] .
Note
❒
You can specify a vertical size
from 210 mm (8.3") to 297 mm
(11.6"). You cannot enter a size
smaller than 210 mm or larger
than 297 mm.
❒
Each time you press
[ mm ]
or
[ inch ] , the units switch be-
tween “mm” and “inch”. If
you enter a length and change
the units by pressing
[ mm ]
or
[ inch ]
, it is converted auto-
matically (fractions are round-
ed off).
F
Enter the horizontal size of the
paper using the number keys,
and then press
[
#
] .
Note
❒
You can specify a horizontal
size from 148 mm (5.9") to
600 mm (23.7"). You cannot
enter a size smaller than 148
mm or larger than 600 mm.
❒
Each time you press
[ mm ]
or
[ inch ] , the units switch be-
tween “mm” and “inch”. If
you enter a length and change
the units by pressing
[ mm ] or
[ inch ]
, it is converted auto-
matically (fractions are round-
ed off).
G
Press [ OK ] .
G
Press [ Exit ] .
H
Press the
{
User Tools/Counter
}
key.
The standby display appears.
Deleting a Special Sender
Use this function to program “Initial
Set Up” of a Special Sender. The By-
pass Tray Paper Size can also be spec-
ified.
A
Press the
{
User Tools/Counter
}
key.
B
Press [ Facsimile Features ] .
C
Press [ Administrator Tools ] .
D
Press [ Program Special Sender ] .
E
Press [ Delete ] , and then select the
Special Sender you want to delete.
RussianC4-EN_Combine-F_FM.book Page 180 Tuesday, April 5, 2005 8:22 PM