18
The motor and encoder cable and single wire for the inputs and outputs are introduced from the bottom. The
power supply is above and pluggable.
Fig. 12: Guide of the TSG cable in TSG housing
Condition for the use of the cabinet housing is to use a plug-in TSG drive and TSG cable. TSG cables are
available in lengths of 2.5, 5.0, 10.0, 15.0 and 20.0[m].
WARNING:
We would like to point out that we do not accept any warranty for errors arising from material
supplied by Langer & Laumann Ing. Büro GmbH, in particular motor or encoder cables. The
use of non-released cables invalidates the type examination certificate 44780 1309930301 and
the certificate of conformity for the manufacturer's equipment.
CAUTION:
The TSG electronic can be placed internally in the cabinet in at least 5[cm] distances between
each other and at least 2[cm] next to each other.
Table 2: Dimensions
Outer dimensions TSG cabinet housing
Width
205[mm]
Height
140[mm]
Depth
160[mm]
Table 3: Weight
Weight of TSG cabinet housing incl. TSG electronic
Weight
ca. 4,1[kg]
Summary of Contents for TSG V4
Page 1: ...1 Installation and Operating Instructions for the device series Door Operator TSG V4...
Page 82: ...82...
Page 83: ...83...
