3-10 TONGUE ASSEMBLY - 13’ - 15’ MODELS
3-10.1
Attach pull straps to the gang tube using
3/4” x 6-1/2” capscrews, lockwashers, and
nuts (19” each side of the center line)
(See
Figure 3-12)
.
3-10.2
Attach the tongue using two 1” x 6-27/64”
pins and klip rings.
3-10.3
Attach transport leveler mountings to the
gang tube using 3/4” u-bolts, lockwashers,
and nuts (on each side of the tongue so that
the springs will be in line with the tongue).
3-10.4
Attach leveler springs. Do not torque 1/2”
cap screw to more than 20 ft. lbs.
3-10.5
Loosen the four front leveler mount bolts
and allow the front of the tongue to touch the
floor. Retighten these bolts to 100 ft.-lbs. of
torque. To level the machine in transport po-
sition,
see Section 4-8.
3-10.6
Mount the hose carrier on the tongue.
3-14
Figure 3-12 Tongue Assembly - 13’ - 15’ Models
Summary of Contents for 3210 Series
