OPERATION OF L&L KILNS WITH A ONE-TOUCH™ (Deg F)
one-touch-operation-deg-f,pd
f
REV: 1/24/19
Page 10
2016
L&L Kiln Mfg, Inc. 505 Sharptown Rd, Swedesboro NJ 08085 P:856.294.0077 F:856.294.0070 [email protected] hotkilns.com
increments to a hold (soak) period.
3. During a hold or soak, the temperature in the kiln will be
alternating in the display with the remaining hold time.
4. When in a hold period, press the
UP
button.
5. When
SStP
is displayed, press the
UP
button again
and
tME
will be displayed.
6. Press
ENTER
and 5 minutes will be added to the hold
time.
7. You may use this procedure as many times as
necessary to get the hold time that you want.
14.2.4 ADD TEMPERATURE TO HOLD PERIOD
1. This is available only during a hold period.
2. This option allows you to add temperature in 5 degree
increments to a hold (soak) period.
3. During a hold or soak, the temperature in the kiln will be
alternating in the display with the remaining hold time.
4. When in a hold period, press the
UP
button.
5. When
SStP
is displayed, press the
UP
button twice
more and
tMP
will be displayed.
6. Press
ENTER
and 5 minutes will be added to the hold
time.
7. You may use the add temperature procedure as many
times as necessary to get the hold temperature desired.
15. CUSTOM PROGRAMS
There are the four programs (shown in Degrees F) that can
be fully customized.
Three of these have been preprogrammed by the factory to
simplify the first firing process.
Once this process has been completed they may be
reprogrammed anyway you like.
15.1 CUSTOM PROGRAM 1
Standard First Firing Program:
∆5 Standard Slow Bisque – SEGS–5 (5 segments)
Seg 1- 2.15 Hrs RA1 - 80ºF º F1–250ºF HOLD- 00.00
Seg 2- 3.75 Hrs RA2 - 200ºF º F2–1000ºF HOLD- 00.00
Seg 3- 1.00 Hrs RA3 - 100-ºF º F3–1100ºF HOLD- 00.00
Seg 4- 4.58 Hrs RA4 - 180-ºF º F4–1915ºF HOLD- 00.00
Seg 5- 3.12 Hrs RA5 - 80-ºF º F5–2165ºF HOLD- 00.00
TOTAL FIRING TIME = 15.6 HRS
15.2 CUSTOM PROGRAM 2
Split First Firing (First Segment):
Seg 1- 2.15 Hrs RA1 - 80ºF º F1–250ºF HOLD- 00.00
Seg 2- 3.75 Hrs RA2 - 200ºF º F2–1000ºF HOLD- 00.00
Seg 3- 1.00 Hrs RA3 - 100-ºF º F3–1100ºF HOLD- 00.00
Seg 4- 2.22 Hrs RA4 - 180-ºF º F4–1500ºF HOLD- 00.00
TOTAL FIRING TIME = 9.12 HRS
15.3 CUSTOM PROGRAM 3
Split First Firing (Second Segment):
Seg 1- 0.85 Hrs RA1 - 200ºF º F1–250ºF HOLD- 00.00
Seg 2- 2.50 Hrs RA2 - 500ºF º F2–1500ºF HOLD- 00.00
Seg 3- 2.30 Hrs RA3 - 180-ºF º F3–1915ºF HOLD- 00.00
Seg 4- 3.12 Hrs RA4 - 80-ºF º F4–2165ºF HOLD- 00.00
TOTAL FIRING TIME = 8.77 HRS
15.4 CUSTOM PROGRAM 4
Blank - nothing is preprogrammed.
16. OPTIONS
16.1 ACCESSING OPTIONS
1. Options are accessed by holding the
ENTER
button
while turning the power onto the control (by turning on
the kiln with the toggle switch) and continuing to hold
onto the
ENTER
button until
EdIt
is displayed.
2. This activates the Options Menu.
3. The first thing you will see after turning the power on
while pressing
ENTER
is
LL-G
or
1t-1
(This is
the software version).
4. Then you will see
2350
if it is a Cone 10 control or
2280
if it is a Cone 6 control.
5. Then you will see
EdIt
and you will hear a beep.
You can now let go of the
ENTER
button.
16.2 OPTIONS
16.2.1 SOUND: BEEPING ON OR OFF AT END OF PROGRAM
1. The first thing to change is the action of the beeper.
