Lanaform LA19011101 Manual Download Page 3

Page: 3 / 20

/ 20 English

FR NL DE IT CS RU SV

Do not carry this device by its power cable
or use the cable as a handle.

Always unplug the device after use or before

cleaning it.

Electrical appliances should never be left
unattended when connected. Unplug it when
you are not using it.

Keep the power cable away from hot surfaces.

Do not use this product before going to sleep.
Exposure to light acts as a stimulant that may
hinder sleep.

Never drop anything or insert any object into
any of the openings.

Do not use this device in a damp atmosphere
(in a bathroom, close to a shower, etc.).

Never use this appliance in a room in which
aerosols (sprays) are used or where oxygen
is administered.

Do not use this device under a cover or un-
der a cushion. Excessive heat can cause fire,
electrocution or injury.

This unit is intended only for family use. This

Lamp should not therefore be used for med-
ical treatment.

Do not use the device in a room not lit by
another light source as this may cause eye
fatigue. Use this device in addition to normal
lighting (daylight or electric light).

If you experience any pain when using this
device, stop using it immediately and consult
your doctor.

We would advise you not to look at the lamp
during your session. You may notice that your
eyes ache during the first few sessions. That
will subsequently disappear.

Consult your doctor before starting to use
this device if:

• You suffer or have suffered from serious

depression;

•  You are hypersensitive to light;
•  You have had an eye disorder;
•  You are taking certain drugs (e.g. certain

anti-depressants, psychotropic substanc-
es, malaria tablets) that might have a det-
rimental effect when using this device;

• You have high blood pressure.

The exposure time depends specifically on

the distance between you and this device.

To find out the recommended distance and
exposure time, please read the chapter “In-
structions for Use”.

PRESENTATION

Thank you for choosing the LANAFORM

Lumino LED. The Lumino LED is a device
for dispensing light exposure. It allows you
conveniently and efficiently to compensate
for the lack of light. The Lumino LED is based

on the use of very clear light (approximately

10,000 LUX) that simulates natural sunlight.

You may use the Lumino LED device while car-

rying on with other activities, such as reading,
writing, using the telephone and even when
working. The additional light produced by
the Lumino LED during the darkest times of
the year increases your exposure to light. It
may have positive effects on your mood in
general. With the Lumino LED, you can enjoy
the benefits of the sun’s light, even during
the dark days of winter!

Description of the device [

insert_photo

1   Feet
2   Light surface
3   Power lead
4   ON/OFF button
5
6   Timer’s indicator light 15 minutes
7   Timer’s indicator light 30 minutes
8   Timer’s indicator light 60 minutes
9   Timer’s indicator light 90 minutes
10  Timer’s indicator light 120 minutes
11  Button –
12  Mood lights button

About exposure to light

Light and its intensity have an enormous
impact on our bodily processes. During the
autumn and winter, the sun’s rays diminish.
Symptoms arising from the loss of light may
therefore appear. Furthermore, conventional
artificial lighting of buildings is not in itself
capable of compensating for this lack of nat-
ural light. The consequences of this situation
may lead to seasonal depression, a lack of
energy, insomnia or melancholy, symptoms
that can be grouped under the term “autumn
or winter blues”.

Exposure to light consists of using light with
a strong LUX* coefficient in order to simulate
the sun’s natural light.

The symptoms of SAD (Seasonal Affective

Disorder) the winter blues can be reduced,
and even disappear, through regular expo-
sure to light with a strong LUX coefficient
during a given period.

* The LUX is the unit measuring the luminance of light.

For example, a sunny summer’s day corresponds to

approximately 50,000 LUX, whereas the conventional

light intensity inside a building is only 500 LUX.

Distance

13 cm

25 cm

39 cm

LUX

10,000

5,000

2,500

Recommended duration

0:30

1:00

1:30

Installing the Lumino LED

You will find two feet for your Lumino LED in

the packaging. Before using it, don’t forget
to screw these feet on to your device so that
it can stand upright.

1 Remove the packaging.
2 Check that all parts are in-

cluded on delivery.

3 Check the device, the power cable

and the feet are not damaged.

4 Put the power cable into the

socket (3) and switch on the light by
pressing the ON/OFF button (4).

5 It is recommended that you stand

close to the light at a distance of 20
to 50cm from the lamp, depending
on the length of time it is used.

info

You can read, write,

make telephone calls etc.
during the session.

6 The closer you are to the light source,

the shorter the session will need to be.

7 Exposure must be regular for a pro-

longed period. Throughout the darkest
days of the year, repeat the therapy for
at least 7 consecutive days or more,
according to individual requirements.

8 Stop the machine after use by

keeping the ON/OFF button pressed
(4) for 3 seconds and unplug it.

Adjusting the timer

1 Having pressed the ON/OFF button

(4) once, the length of time at
which it runs is set to infinite.

2 If you want to programme 15 minutes

of use, press the ON/OFF button
(4) button twice. Timer’s indicator
light 15 minutes (7) lights up.

3 If you want to programme 30 minutes

of use, press the ON/OFF button (4)
button three times. Timer’s indicator
light 30 minutes (8) lights up.

4 If you want to programme 60

minutes of use, press the ON/OFF
button (4) four times. Timer’s indicator
light 60 minutes (9) lights up.

5 If you want to programme 90