LAGUNA
TOOLS
45
L112
Test Tool Number - L112 T#.
Skip next line if tool number is equal to T#.
L113
Spindle Speed Conditions - L113 L# H# V#
Skip the next line if the V# is not greater than the L# and less than the H#.
L120
Tool Change - L120 T#
Sets current tool number for machines with an automatic tool changer. The tool number is available as {TP2}
in subsequent commands.
L201
Set 201 Signal Command - L201 FileName T# C# S#
Sets the command used with the 201 signal type.
L202
Set 202 Signal Command - L202 [Command]
Sets the command used with the 202 signal type.
L204
Activate Signals
L204 C# activates signals and enables the specified channel.
L204 activates all signals and enables.
L205
Deactivate signals
L205 C# deactivates signals and enables the specified channel.
L205 deactivates all signals and enables.
L210
Select Alternate Low Limits - L210 XYZW
Selects axis to use alternate low limits.
L210.1
Select Alternate Low Limit Pin - L210.1 XYC#
Selects alternate low limit pin from the specified C# channel. If no channel is specified, the original settings
are restored.
L211
Select Alternate High Limits - L211 XYZW
Selects axis to use alternate high limits.
L211.1
Select Alternate High Limit Pin - L211.1 XYC#
Selects alternate high limit pin from the specified C# channel. If no channel is specified, the original settings
are restored.
L212
Select Primary Limits
Selects the primary limits for all axes.
L213
Dual Axis, Select Main - L213 XYZW
Selects the main motor on a dual motor axis.
L214
Dual Axis, Select Secondary - L214 XYZW
Selects the secondary motor on a dual motor axis.
Summary of Contents for CNC Swift Series
Page 54: ...LAGUNA TOOLS 54 SPECIFICATIONS...
