Laguna Tools CNC Swift Series, Manual

Page: 19 / 55

LAGUNA TOOLS 19
NOTE: It is important that the WinCNC application be running on the PC before the machine is
powered. This is to ensure that the user will have control over the machine at all times. If the
machine is powered without the WinCNC application running, the machine may be susceptible to
electronic noise causing abnormal behavior.
3.
Turn the main power switch to the ON position. The switch is located on
the front of the electrical cabinet. The control power light should be in the
RED state.
4.
Turn the machine key to position 1.
5.
Press the Green ON button. The machine is now powered and the white indicator light will be ON.
SHUTTING DOWN THE MACHINE
1.
Turn the power key to position zero.
2.
Turn the Main power switch to the OFF position.
3.
Close the desktop WinCNC application.
4.
Shut down the PC.
EMERGENCY STOP OPTIONS
1. Emergency Stop Button – There is a emergency stop switch located on the electrical cabinet. Press
during any machine operation to halt the machine.
2. Reset after an emergency stop – Rotate the emergency stop switch clockwise a 1/4 turn.
3. Keyboard emergency stop
3.1 ESC – Pressing the ESC key on the keyboard will abort the current file or command being
executed. The program or command will have to be reentered after aborting.
3.2 SPACE BAR – Pressing the SPACE BAR will pause a file or commands execution. Press the ENTER
key to resume executing the program or command.
Figure 19. Primary power
switch in the ON position
Figure 20. (Left) Red indicator light will be on when
primary power switch is in the ON position. (Right)
White indicator light will be on when the machine has
control power.