Laguna Tools CNC Swift Series, Manual

Page: 38 / 55

LAGUNA TOOLS 38
G53 Rapid Move - G53 X# Y# Z# W#
Moves to the position specified at rapid velocity, ignoring tool measures and local coordinates. G53 alone will
lift all vertical or type 3 axes.
G54 G54 Workspace - Rotational: G54 X# Y#
Select the Z head. If G54 is selected from G55, G56, or G57 mode, the Z head will be moved to the current
XY position.
G55 G55 Workspace - Rotational: G55 X# Y#
Select the W head. If G55 is commanded from G54, G56, or G57 mode, the W head will be moved to the
current XY position.
G56 G56 Workspace - Rotational: G56 X# Y#
Select the U head. If G56 is commanded from G54, G55, or G57 mode, the U head will be moved to the
current XY position.
G57 G57 Workspace
Select the V head. If G57 is commanded from G54, G55, or G56 mode, the V head will be moved to the
current XY position.
G73 Chip Break Cycle - G73 X# Y# Z# R# Q# F#
Moves to XY specified at Rapid velocity. On the first peck, moves to R retract height at Rapid velocity, moves
to Q peck depth at F feed velocity, lifts 0.05” at Rapid velocity to break the chip, moves to next peck depth at
Feed velocity. The cycle repeats until Z depth is reached. Then moves back to retract height R at Rapid
velocity. Without this cycle, some materials can produce a long “stringer” which can become a safety issue to
the operator.
G80 End Drill Cycle
Used to disable the G81 Drill Cycle mode. Note: Switching to G0 or G1 will also break out of the drill cycle
mode.
G81 Drill Cycle - G81 X# Y# Z# R# F#
Moves to XY specified at Rapid velocity. Moves to R (clearing height) at Rapid velocity. Moves to Z specified
at Feed velocity. Moves back to R at Rapid velocity. F allows you to set the feed rate.
G82 Dwell Cycle - G82 X# Y# Z# R# P# F#
Moves to XY specified at Rapid velocity. Moves to R (clearing height) specified at Rapid velocity. Moves to Z
specified at Feed velocity. If P is specified, bit pauses that amount of time at the bottom of the hole, then
moves back to R at Rapid velocity. P is measured in milliseconds (thousandths of one second). F allows you
to set the feed rate.
G83 Peck Drill Cycle - G83 X# Y# Z# R# Q# F#
Moves to the XY specified at Rapid velocity. On the first peck, moves to R retract height at Rapid velocity,
moves to peck depth Q at Feed velocity, then moves back to retract height at Rapid velocity. On each
subsequent peck, moves at Rapid velocity to within 0.05” of previous peck depth, then moves at Feed
velocity to next peck depth. Cycle repeats until Z depth is reached. Then moves back at Rapid velocity to
retract height R. The F allows user to set the feed rate.
G90
Absolute Mode