Laguna Tools CNC Swift Series, Manual

Page: 47 / 55

LAGUNA TOOLS 47
L300
Lock Axis - L300 XYZW
Locks specified axis motion. Any motion commanded to a locked axis will be ignored.
L301 Unlock Axis - L301 XYZW
Unlocks specified axis motion.
L400 Create Home File
Creates a home file at the machine’s current position.
L401 Recall Positions
Moves all axes to the positions where they were at previous to the last file run.
L500 Store Absolute Positions - L500 [X, Y, Z...] [P H T] L# C# N”Name”
[X, Y, Z...] - axes to set positions for. If none is specified then all axes positions are stored.
[P H T] - type of position (P)osition, (H)ome Position, (T)ool Position. Can only use one value.
L# - 0 no vertical head lift, 1 include head lift.
C# - Clearance for vertical heads if L1.
N”Name” - Name for specified position. < 16 characters long.
L500.2 - L500.2 T# N# A# C# O# H# M#
T# specifies the tool number.
N# specifies the nominal diameter for the tool.
A# specifies the actual diameter for the tool.
C# specifies the diameter compensation for the tool.
O# specifies the height offset for the tool.
H# specifies the tool height.
M# specifies the maximum current allowed for the tool.
This command sets up a tool library instead of using the dialog boxes.
L501 Store Local Positions - L501 [X, Y, Z...] [P H T] L# C# N”Name”
[X, Y, Z...] - axes to set positions for, if none specified then all axes positions are stored.
[P H T] - type of position (P)osition, (H)ome Position, (T)ool Position. Can only use one value.
L# - 0 no vertical head lift, 1 include head lift. Default L1.
C# - Clearance for vertical heads if L1.
N”Name” - Name for specified position. < 16 characters long.
L600 Disable Mapping Adjustments
Disable mapping adjustment for the specified axis. If no axis is specified, mapping adjustments for all axes
are disabled.
L601 Enable Mapping Adjustments
Enable mapping adjustment for the specified axis. If no axis is specified, mapping adjustments for all axes are
enabled.
L602 Start Mapping Setup
Starts mapping setup for specified axis. First axis specifies the axis to map and the second axis specifies the
axis to adjust. The axis map will automatically move to the start map position. No axis spec stops the
mapping setup.