Parasol Installation Instructions
OPERATE THE SHADE
- Standard Bottom-Up and Top-Down shades
have one operating cord. Two-on-one, Duo-Lucent,
and Top-Down/Bottom-Up shades have two
operating cords.
- Keep the cord close to the fabric when operating
the shade.
- To raise or lower the shade, disengage the cordlock
by moving the cord to the center of the shade. Pull
on the cord to raise the shade.
- Engage the cordlock by returning the cord to the
original position.
- To operate shades with two cords, the right cord
operates the middle rail and the left cord operates
the bottom rail (unless specified differently on the
order).
REMOVE THE SHADE
Standard Brackets
- Fully raise the shade.
- While holding the headrail, loosen the tab screw on
each bracket to release the headrail.
Swivel Brackets
- Fully raise the shade.
- While holding the headrail, pull the push tab to rotate
the swivel arm to the open position to release the
headrail.
End Mount Brackets
- Reverse the installation procedures.
Tab
INSTALL CORD TENSION LOCK
-
The revised American National Standard
for Safety of Corded Window Covering
products requires if corded window
products are used in the home, cord
cleats or cord tension locks must be
properly installed.
- See separate instructions included for installation of
the Cord Tension Lock for child and pet safely.
INSTALL OPTIONAL HOLD-DOWNS
-
Lower the shade and place the pins from the hold-down
brackets into the end caps on the bottom rail.
- On the mounting surface, mark the bracket hole
locations.
- Check that the brackets are level and attach them to
the mounting surface using two screws.
CARE AND CLEANING
Regular light dusting with a feather duster is all the
cleaning that is needed in most circumstances. For
deeper cleaning, vacuum gently with a soft brush
attachment. Do not vacuum Triple cell fabrics.
Disengaged
Cordlock
Cordlock
Cordlock
Bottom Rail
Middle Rail
This cord
operates the
bottom rail.
This cord
operates the
middle rail.
Cordlock
Disengaged
Cordlock
