Parasol Installation Instructions
ATTACH THE VALANCE
- Slide the valance clip under the bottom lip of the
headrail. (A.)
- Rotate the valance clip up to snap it into place on
the headrail. (B.)
- Keep a minimum of 3” between the end of the
headrail and the valance clips. Be sure to avoid
areas where the headrail attaches to the
installation brackets.
- Outside mounts and non-flush inside mounts only:
Use the valance corner end cap and the lock to
attach a return to each end of the valance.
- Slide the valance corner end cap into the valance
return.
Important:
Do not hammer the end cap into
the valance return. This will distort the end cap. (C.)
- Place the lock into the circular opening of the
valance corner end cap with the prongs facing out.
- Using a flat blade screwdriver, turn the lock to the
upright position. The tab on the valance corner end
cap will stop the lock from turning all the way around.
Note
: It is normal for the prongs on the lock to separate
when the screwdriver is inserted. (D.)
- Once the valance corner end cap is attached to the
valance return, repeat the steps to attach the valance
corner end cap to the valance.
- To attach the valance to the valance clips, insert the
top of the valance into the top of the clip and rotate
the valance down to snap it into place onto the
headrail. (E.)
- For wider shades with two-piece valances, lay the two
pieces on a flat surface and butt together. Attach a
valance clip at the seam to hold the two pieces together.
ATTACH THE HANDLE
- If the handle is not already attached to the moving rail,
position the handle so the holes on its flat portion are
aligned with the screw holes on the moving rail. The
curve of the handle should face out, away from the
fabric.
- Attach the handle to it’s moving rail using the provided
screws. For split stack and Duo-Lucent designs, repeat
the same steps for the second moving rail. (F.)
Headrail
Valance
Clip
Valance
Return
Valance
Corner
End Cap
Valance
(Front of
Shade) Lock
Valance Corner
End Cap
Valance Return
(Left Return Shown)
Prong
A.
B.
C.
D.
E.
F.
