Parasol Installation Instructions
INSTALL THE BRACKETS Cont.
End Mount
- Position the end mount brackets so that the top of the
attached installation brackets equal the ordered height
of the shade. Mounting surface must be vertical and
flat.
- Mount brackets using the screws provided. Drywall
mounting is not recommended.
INSTALL THE SHADE
- Fit the front channel on top of the headrail onto the front
lip of the installation brackets.
- Push the headrail up and back until it snaps into the
brackets.
1
1
/
4
"
Minimum
Ordered
Shade
Height
Ordered
Shade Height
The back of the headrail
snaps into the bracket.
The front of the bracket
fits under the groove.
Headrail
Bracket
Snap
in Place
End Mount
OPERATE THE SHADE
- Pull down slowly on the rear cord of the cord loop to
lower the shade.
- Pull down slowly on the front cord of the cord loop to
raise the shade.
- If the cord tension lock moves up the cord, you have not
secured it to the wall or window frame. You must do
so for the shade to operate properly.
- For Top-Down/Bottom-Up and Duo-Lucent shades, the
right cord operates the middle rail and the left cord
operates the bottom rail (unless reverse controls were
specified on the order.)
Important:
You must first lower the bottom rail
before lowering the middle rail. Likewise, you must
first raise the middle rail before raising the bottom rail.
INSTALL CORD TENSION LOCK
-
The revised American National Standard
for Safety of Corded Window Covering
products requires if corded window
products are used in the home, cord
cleats or cord tension locks must be
properly installed.
- See separate instructions included for installation of
the Cord Tension Lock for child and pet safely.
