Label FEED NAVIGATOR, User Manual

Page: 50 / 92

4.8 - WIRELESS DATA TRANSFER
This Function allows the data relative to the weighing operations stored in
the 3000 Weighing Operations Archive to be transferred to a PC through a
wireless connection or the Recipes programmed with a Personal Computer
to be memorized in the equipment. To transfer the data wirelessly, the
Label Wireless Linker card (optional) must be installed in the equipment
and the user must have access to a Personal Computer loaded with the
Farm Manager 4 software or a later version, along with the Label USB
Wireless Linker device. The maximum distance between the Label USB
Wireless Linker device and weighing scale is 300m; The capacity is
influenced by the different environmental condition, such as for example the
proximity ti radio repeaters, the persence renforced concrete walls, metal
structure or objects that come between the wireless devices. The proximity
of cellular phones can also interfere with the trasmission.
The reach most effective data trasmission locate the Label USB Wireless
Linker close to a window toward the mixing wagons.
For additional information contact Customer Service .
•
Recipe Programming Activity.
•
Manual Weighing Activity.
The commands necessary to perform the Data Transfer are contained in
the Farm Manager software. When the PC carries out a command, the
equipment must be in the Recipe Programming Activity or Manual Weighing
Activity. The [
RF WAIT
] message will appear on the display for the entire
duration of the data transfer. If the transfer is performed successfully, the
[
END
] message will appear on the display.
•
The Wireless Data Transfer Function is active only if the Enabling Data
Transfer Preference is active (code 71).
user’s guide