Label FEED NAVIGATOR, User Manual

Page: 26 / 92

3.2.3 - RECIPES BY ANIMAL NUMBER WITH DIVIDED UNLOADS
1. When switching on the equipment automatically enters the Recipe Programming
Activity. The PROG. symbol lights up on the display and the [ recipe name ] message
appears.
If no name has been assigned to the Recipe, the [
REC
x ] message will appear on
the display, where x indicates the progressive number of the Recipe selected.
2. To select the Recipe to be programmed or executed, press the
Recipe
key,
Recipe
and
e
or the
q z
(
e
).
3. To modify the Recipe Name (max. 6 alphanumeric characters), use the
Alphanumeric Writing ( 2FN ).
4. Enable the Recipe to be programmed by Animal Number, by pressing the
Animal
key. The message [
N. HEADS
] will appear on the display along with the previously
programmed value. Select [
AUTO
] by pressing the
q z
(
e
) keys, if the “0” value
appears on the display, to display [
AUTO
] press the
z
key one time only. Confirm by
pressing the
Animal
key or the
OK
key. The equipment will light up
g
next to the
symbol
���
and the ANIMAL symbol.
r
Important: for this type of Recipe, program first all the Ingredients and then all the
Unloads.
r
5. To set a Recipe to the Daily mode, select the Recipe and press the
OK
key for 2
seconds. Release the key when
g
appears on the display next to the symbol .
The
g
will appear next to the symbol each time the Daily Recipe is displayed.
r
Important: to set a Recipe to the Daily mode, the Daily Recipe Function (see
chapter 4.13.9) must be enabled; the maximum programmable number of
Ingredients/Unloads in the Daily Recipe is half the number programmed in the
standard Recipes.
r
6. To copy a Recipe into another position in the Archive, select the Recipe and press
the
OK
key for 4 seconds. Release the key when, after the [
COPY
] message
appears, the display goes back to the [ recipe name ] message. The
E
symbol will
appear on the display to indicate that the Recipe Copy Function has been selected.
Select the Recipe in which the data is to be copied by pressing the
q z
(
e
) keys.
Confirm by pressing the
OK
key for 2 seconds. The [
INSER.
] message will appear on
the display. To exit from the Function without copying the Recipe, press the Clear key
for 2 seconds.
7. To delete the data memorized in the Recipe (Name, Name and weight of the
Ingredients/Unloads, parameters) press the
Clear
key for 4 seconds.
The [
DELETE
] message and the Recipe Name will appear alternately on the display.
user’s guide