Label FEED NAVIGATOR, User Manual

Page: 28 / 92

14. To program the Unload Name (max. 6 alphanumeric characters), press the
2FN
key for 2 seconds and use the Alphanumeric Writing. If the Name is being used in
another Recipe, instead of entering the Name using the alphanumeric keys, inside
the Alphanumeric Writing it is possible to select the Name from the Ingredient/
Unload Name Archive, pressing the
q z
(
e
) keys. After selecting the Name, press
the OK key to confirm.
r
Important:
when a new Name is created, the Name is automatically memorized in
the Ingredient/Unload Name Archive.
r
15. To program the number of animals in the Unload (max. 999), use the
q z
(
e
) keys
or the Alphanumeric Writing ( 2FN ).
r
Important:
if the
2FN
key is pressed for more than 2 seconds, the equipment will
automatically select the procedure Ingredient/Unload Name Programming
(see par. 9).
r
16. If the user wishes to modify the Appetite Percentage of an Unload, select the Unload
and press the
DMI
key. The [
APP. F.
] message and the previously programmed
value will appear alternately on the display. Change the value (max. 200%) by
pressing the
q z
(
e
) keys or with the Alphanumeric Writing (
2FN
). To exit, press the
DMI or the OK key. If the Appetite Percentage is different than 100%, the
g
will
light up on the display next to the symbol
�������
.
r
Important: if the Reciping Mode Preference (code 65) is set as percentage, the
Appetite Percentage Function is not available.
r
17. To select another Unload, repeat the procedure from point 13.
18. If the user wishes to modify the type of Skip to the Next Ingredient/Unload compared
to the one automatically set with the relative Function (see chapter 4.13.1), select
the Ingredient/Unload that you wish to change and press the
Block
key for 2
seconds. The change is accompanied by the switching on (Manual skip) or switching
off (Automatic skip) of the
m
symbol on the display.
19. To delete the selected Ingredient/Unload (Name, weight and parameters) from
the Recipe, press the
Clear
key for 4 seconds. The [
DELETE
] message and the
selected Name will appear alternately on the display.
20. To display the Total Animal Number, press the
ANIMAL
key. The [
N. HEADS
] and
[
AUTO
] messages will appear alternately on the display. Press the Net/Total key
and keep it pressed. The programmed value will appear on the display.
user’s guide