La Marzocco Linea PB Operating Manual Download Page 58

Page: 58 / 64

Display

Operating Procedure

Description

Programming Mode

Filter Alarm

Settings

Filter Alarm

“Technical” Programming

To exit the submenu move between the parameters using the buttons T1 and T2 until the exit submenu

is displayed. Press the T3 button to exit the submenu.

Press T1 or T2 to continue with the programming of the other parameters.

To exit the menu move between the parameters using the buttons T1 and T2 until the exit menu is displayed.

Press the T3 button to exit the menu.

Alternatively, you can exit the “Technical” programming and return to the normal use of the espresso machine by

pressing T2 and T3 at the same time.

Filter Alarm

Exit

• This parameter allows the technician to

preprogram an alarm that notifies the user

when the water filter requires service or

replacement.

• When the programmed volume of water

has passed through the espresso machine

the error message “Change Filter” is

displayed.

• A value of 0 (zero) disables the filter alarm

parameter.

• This feature can be enabled or disabled.

LaMarzocco 00:00

CB 93.8

C SB

Summary of Contents for Linea PB

































































Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands

La Marzocco Linea PB, Operating Manual

Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands