La Marzocco Linea PB Operating Manual Download Page 53

Page: 53 / 64

Display

Operating Procedure

Description

Programming Mode

Eco Mode
Settings

ECO Mode

“Technical” Programming

• This parameter allows the technician to

set up a temperature to be maintained in

case of a temporary non utilization of the

espresso machine.

• It is possible to set this parameter also during

the normal operation of the machine by

pressing T1 and T2 at the same time.

After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2 until

the following screen is displayed.

Press the T3 button to enter the menu.

Press the T3 button to enter the menu, move between the parameters with the buttons T1 and T2

to set the desired temperature, press the T3 button to confirm the value.

Press the T3 button to enter the menu, move between the parameters with the buttons T1 and T2

to set the desired time (in minutes), press the T3 button to confirm the value. A value of “

” (zero) disables the

Eco Mode parameter.

To exit the submenu move between the parameters using the buttons T1 and T2 until the exit submenu is

displayed. Press the T3 button to exit the submenu.

Press T1 or T2 to continue with the programming of the other parameters.

Enter Password

******

Eco Mode
Settings

Eco Mode Temp

-10.0

Auto Eco Time

Eco Mode

Exit

Summary of Contents for Linea PB

































































Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands

La Marzocco Linea PB, Operating Manual

Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands