La Marzocco Linea PB Operating Manual Download Page 59

Page: 59 / 64

Display

Operating Procedure

Description

Programming Mode

Reset

Settings

Reset

“Technical” Programming

• This parameter allows the technician to

reset all the values returning to initial

factory settings.

• It is possible to reset the settings you

made in the “Barista” programming or

the settings you made in the “Technical”

programming.

After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2 until

the following screen is displayed.

Press the T3 button to enter the menu.

Press the T3 button to reset the settings you made in the “Barista” programming.

Press the T3 button to reset the settings you made in the “Technical” programming.

To exit the submenu move between the parameters using the buttons T1 and T2 until the exit submenu is

displayed. Press the T3 button to exit the submenu.

Press T1 or T2 to continue with the programming of the other parameters.

To exit the menu move between the parameters using the buttons T1 and T2 until the exit menu is displayed.

Press the T3 button to exit the menu. Alternatively, you can exit the “Technical” programming and return to the

normal use of the espresso machine by pressing T2 and T3 at the same time.

Enter Password

******

Reset

Settings

Barista Settings

Reset

Exit

Tech, Settings

Reset

Exit

Summary of Contents for Linea PB

































































Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands

La Marzocco Linea PB, Operating Manual

Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands