La Marzocco Linea PB Operating Manual Download Page 39

Page: 39 / 64

Display

Operating Procedure

Description

Programming Mode

“Technical” Programming

Tea Dose
Settings

After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2 until

the following screen is displayed.

Press the T3 button to enter the menu.

Press the T3 button to enter the menu, move between the parameters using the buttons T1 and T2

to select

ENABLED

DISABLED

, press the T3 button to confirm the option.

To program the brewing time, press the tea button to start and then press it again to stop when the desired dose is

achieved.
Now the saved brewing time is displayed.

Enter Password

******

• This parameter allows the operator to

program the amount of water (brewing

amount) for the tea button.

• This feature can be enabled or disabled.

Tea Dose

ENABLED

Tea Dose
Settings

Tea Dose

Program

Tea Dose

Press Tea Button

To Stop

Press Tea Button

To Program

Tea Dose Saved

5.0 Seconds

Summary of Contents for Linea PB

































































Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands

La Marzocco Linea PB, Operating Manual

Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands