EN
56
Display
Operating Procedure
Description
Programming Mode
Filter Alarm
Settings
Filter Alarm
“Technical” Programming
• This parameter enables the technician
to program an alarm that will alert the
user about the need for maintenance or
replacement of the water filter.
• Once the set volume has been reached,
the error message “Filter Alarm” will be
displayed.
• A value of 0 (zero) disables the filter alarm
parameter.
• This feature can be enabled or disabled.
1
2
After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2 until
the following screen is displayed.
Press the T3 button to enter the menu, move between the parameters using the buttons T1 and T2
to select
ENABLED
or
DISABLED
, press the T3 button to confirm the option.
Press the T3 button to enter the menu, move between the parameters using the buttons T1 and T2
to select
LITRES
or
DAYS
, press the T3 button to confirm the option.
Press the T3 button to enter the menu, move between the parameters with the buttons T1 and T2
to set the desired value, press the T3 button to confirm the value.
Press the T3 button to enter the menu, move between the parameters with the buttons T1 and T2
to set the desired value, press the T3 button to confirm the value.
Press the T3 button to enter the menu, move between the parameters with the buttons T1 and T2
to set the desired value, press the T3 button to confirm the value.
Enter Password
******
3
Filter Alarm
ENABLED
Alarm Units
LITERS / DAYS
4
Filter Status
0 of 1000L
6
Alarm Tea Use
40 Coffee Wate
5
Filter Alarm
1000 Liters
Summary of Contents for Linea PB
Page 1: ...EN L I N E A P B ...
Page 63: ......
Page 64: ...printed on environmentally friendly Munken paper ...