EN
46
Display
Operating Procedure
Description
Programming Mode
Display Chrono
NO
Crono Function
“Technical” Programming
• When enabled, this parameter displays a
timer that times each shot.
• The timer is reset each time a button on the
keypad is pressed.
• If enabled, the Chrono function is
permanently displayed during brewing,
while during wait state it alternates with
the programmable name.
1
2
After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2 until
the following screen is displayed.
Press the T3 button to enter the menu, move between the parameters using the buttons T1 and T2
to select an option (
NO
/
TIME
/
PULSES
), press the T3 button to confirm the option.
In the case of active option (
TIME
or
PULSES
) the display shown to the side appears.
Press T1 or T2 to continue with the programming of the other parameters.
To exit the menu move between the parameters using the buttons T1 and T2 until the exit menu is displayed.
Press the T3 button to exit the menu.
Alternatively, you can exit the “Technical” programming and return to the normal use of the espresso machine by
pressing T2 and T3 at the same time.
Enter Password
******
3
Display Chrono
NO
Exit
Menu
4
GR1 GR2 GR3
18 0 0
5
LaMarzocco 00:00
CB 93.8
°
C SB
6
Summary of Contents for Linea PB
Page 1: ...EN L I N E A P B ...
Page 63: ......
Page 64: ...printed on environmentally friendly Munken paper ...
